QLab Pro Time to Temperature Configuration Oven…

• 208-240VAC, 60Hz, 12A, CSA, and UL compliant oven.
• Wireless control by Android based tablet computer QL-101-501.
• Powerful and friendly user interface with touch screen, 7” display.
• Preloaded EPA 3015, 3051 3052 and other digestion methods.
• Unlimited digestion recipes can be developed and stored.
• Software allows users to edit, save and run methods. Printouts are also possible.
• Ports to transfer methods or update software with data storage capacity of about 6 GB.
• Temperature and pressure monitoring and real-time graphical display of digestion parameters of each vessel.
• IR temperature sensing for remote/ non-invasive temperature measurement of all vessels.
• Facility of additional in-situ pressure sensing vessel and/ or temperature sensing vessel. This is not necessary as every vessel is monitored with a non-contact sensor.
• Capable of identifying vessel in case of over pressure.
• Microwave power available in small increments.
• Rotating antenna and 360° carousel rotation ensuring uniform microwave heating.
• Ease of loading carousel vessel by vessel within the system.
• Real-time graphical display for digestion parameters
• High efficiency 150 CFM, 2-speed blower built-in for fume exhaust and post-digestion vessel cooling inside the oven.
• Corrosion resistant PTFE coated reinforced stainless-steel cavity and acid resistant polymer shell for long life.
• Cavity volume 40 litres 30.5 X 34 X 39 cm (h x d x w).
• System cavity has a capability of sensing device to automatically turn off the system if a vessel event occurs.
• Spring-loaded door that automatically relieves pressure in the case of a vessel event to provide additional safety.
• Up to 1200 Watts power output.
• 2450 MHz magnetron frequency.
• Magnetron power cutoff in case of over limit pressure release.
• Full absorption of reflected microwave energy at 100% power.
• Auto Shut off function for system shut down if full power is applied over a specified time to prevent runaway reactions.
• Compatible with Questron eVHP or LVHT vessel sets.
• Option of QBlock pre- and post-digestion treatment of samples in microwave digestion vessel liner itself to minimise contamination, concentrate samples, boric acid treatment for excess HF acid or evaporate excess acids.